What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Red Devil Industrial Fire Stop Sealant, Cartridge, LC150RD-05/04/2015
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaRed Devil Industrial Fire Stop Sealant, is a versatile Intumescent product intended for fire stopping a wide array of applications in small commercial or grouped residential construction or other structures with similar applications. Seals penetration openings against the spread of fire, smoke, gases and water. provides up to a 2 hour fire rating for typical service penetrations through concrete or wood floors, concrete or masonry walls, as well as gypsum board walls.
Purpose of product.
Usage: Fire stop.Structure such as solid, liquid, aerosol etc.
Form: pasteDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 14, 20244175 Webb Street
Pryor OK 74361
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Chemical of Concern (CoC)
Chemical of Concern(CoC)Non-hazardous ingredient(s) 999999-57-5 100.0 No -
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Safety Data Sheet (SDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Safety Data Sheet(SDS) Date that the Safety Data Sheet (SDS) was issued by manufacturer of a specific product.
SDS DATE :May 04, 2015 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING1 0 0 -
V.O.C Information
Volatile Organic Compounds g/L With Solvent : 10.0
-
Warnings
Hazard Statements
May be irritating to skin, eyes and respiratory system.
Precautionary Statements
Prevention
None.
Response
None.
Storage
None.
Disposal
None. -
Acute health effects
From SDS:
Emergency Overview
May be irritating to skin, eyes and respiratory system.
Potential Health Effects
Eye Contact: Direct contact may cause mild irritation.
Skin Contact: May cause mild irritation.
Inhalation: Material is not likely to present an inhalation hazard at ambient conditions.
-
Chronic health effects
From SDS:
Redness and itching or burning sensation may indicate eye or excessive skin exposure. Excessive exposure may cause irritation to the upper and lower respiratory system. May cause possible irritation to mucous membranes of the mouth, throat and stomach if ingested. -
Carcinogenicity
Toxicity data on product or product components is not available.
-
Handling information
Keep containers closed when not in use. Use with adequate ventilation. Do not store below 40 degrees F (4 - 5 degrees C) to prevent freezing and possible rupture of container. Avoid contact with eyes and skin. Avoid breathing vapor. Do not take internally. Keep in cool, dry, ventilated storage areas in closed containers. Transfer only to approved containers having correct labeling. Containers that have been opened should be carefully resealed and kept upright to prevent leakage. Keep out of reach of children.
-
Disposal information
The generation of waste should be avoided or minimized whenever possible. Although this product is classified as non-hazardous under the Resource Conservation and Recovery Act (RCRA) 40 CFR 261 this material and its container should be disposed of in a safe way as empty containers may contain product residue. Incinerate in approved facility. Do not incinerate closed container. Dispose of in accordance with Federal, State/Provincial and Local laws and regulations
-
California Prop. 65 Warning
No data available.
-
First Aid
Eye Contact: Immediately flush eyes with lukewarm water for 15 - 20 minutes while holding the eyelid(s) open. If contact lens is present, DO NOT delay irrigation or attempt to remove lens. Take care not to rinse contaminated water into the unaffected eye or onto the face. Immediately obtain medical attention.
Skin Contact: Remove contaminated clothing, shoes and leather goods. Quickly and gently blot or wipe away excess chemical. Flush with lukewarm flowing water for 15 minutes. If irritation persists, repeat flushing. If irritation persists, obtain medical advice.
Inhalation: If product vapors cause respiratory irritation or distress, move the exposed person to fresh air immediately. If breathing is difficult or irregular, administer oxygen; if respiratory arrest occurs, start artificial respiration by trained personnel. Loosen tight clothing such as a collar, tie, belt or waistband. If symptoms persist, seek medical attention immediately.
Ingestion: Rinse mouth with water. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention immediately.
-
UN Global Harmonization Classification